GK8LB
Octo LNB
with MK4 Dish Bracket

Features

Feed up to 8 receivers from an Octo LNB

Ridge on neck places LNB at focal point of Mk4 dish

Large arrow helps align the polarity of the LNB

Angle markings on neck for alignment

Universal switching for standard satellite receivers

Spirit level helps ensure the dish is vertical

Bracket comes fitted to LNB and clips onto dish

Pull down weather shield protects connections

GeoSync’s OCTO LNB uses universal switching making it compatible with Sky-HD, Freesat HD and other satellite receivers for European TV broadcasts in the Ku band. Each LNB is supplied fitted with a bracket to connect onto the popular elliptical dishes used in the UK.

An Octo LNB will feed either 8 satellite receivers or 4 satellite receivers with a built-in recorder (PVR) or a mix of the two.

⦿ 4 outputs allow you to feed signals to 4 satellite receivers or 2 receivers with built-in recorders (PVR’s)

⦿ Fitted with a bracket for the popular Mk. 4 elliptical dishes used in the UK

⦿ Spirit level helps ensure dish is set up correctly

⦿ Skew angle guide helps align on Sky or Freesat in the UK

⦿ Low noise factor further improved with patent feedhorn design for a cleaner signal and better picture

⦿ Pull-down weather shield keeps rain away from cable connections

Media

GK8LB Octo LNB with MK4 Dish Bracket

Choosing the right LNB for Sky-Q or Freesat 4K

Installation

The GK8LB Universal OCTO LNB can be used to receive signals from one of many satellites broadcasting signals in the Ku band down to us. The 8 outlets can feed 8 standard satellite receivers or 4 PVR’s or a mix of the two.

Are you replacing an LNB on a Mk4 elliptical satellite dish? Then installation is as easy as 1, 2, 3.

This guidance is given for the replacement of an LNB on a Mk.4 elliptical dish and assumes that the dish is correctly aligned. If you have a different type of dish, it should be supplied with a 40mm dia. LNB bracket which is compatible with GeoSync LNB’s.

1) If you are trying to receive Sky™ or Freesat™ refer to the map opposite and align the bracket on the LNB at the appropriate angle, then tighten it securely.

2) Having removed the old LNB slot the bracket onto the satellite dish arm and secure it in place with the split pin.

3) Connect each of the coax cables to the outlets on your new LNB and pull down the weather shield.

Technical Spec